Manualshelf

HP ProLiant BL25p Generation 2 Server Blade Maintenance and Service Guide

ManualsBrandsHP ManualsServerHP ProLiant BL25p G2 Server
41424344454647484950
Removal and replacement procedures 43
5.
Remove the battery.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
Power converter module
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.