HP ProLiant BL25p Generation 2 Server Blade Maintenance and Service Guide

Removal and replacement procedures 35
5.
Remove the battery from the battery housing.
To replace the component, reverse the removal procedure.
HP Smart Array E200i Controller battery cable
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove the HP Smart Array E200i Controller battery ("HP Smart Array E200i Controller battery" on
page 34).
5. Disconnect the battery cable from the cache module.
To replace the component, reverse the removal procedure.