HP ProLiant BL25p Generation 2 Server Blade Maintenance and Service Guide

Removal and replacement procedures 29
6.
Remove the front bezel.
To replace the component, reverse the removal procedure.
Processor air baffle
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove the processor air baffle.
To replace the component, reverse the removal procedure.
IMPORTANT: To ensure proper cooling, be sure the correct processor air baffle is installed at
all times.