HP ProLiant BL20p Generation 4 Server Blade Maintenance and Service Guide

Removal and replacement procedures 32
Multifunction network adapter
To remove the component:
1. Back up all server blade data.
2. Power down the server blade (on page 24).
3. Remove the server blade (on page 24).
4. Remove the access panel ("Access panel" on page 25).
5. Remove the multifunction network adapter.
To replace the component, reverse the removal procedure.
Fibre Channel mezzanine
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Disconnect the FC mezzanine cable from the FC mezzanine connector.