Manualshelf

HP ProLiant BL20p Generation 4 Server Blade Maintenance and Service Guide

ManualsBrandsHP ManualsServerHP ProLiant BL20p G4 Server
21222324252627282930
Removal and replacement procedures 28
2.
Install the hard drive.
Power button/LED board
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Disconnect the power button/LED cable from the LED board ("Internal components" on page 56).
5. Remove the two T-5 Torx retaining screws from the bottom of the chassis.
6. Remove the power button/LED board.
To replace the component, reverse the removal procedure.