ProLiant BL20p Generation 3 Server Blade User Guide

Server Blade Configuration and Utilities
— 10 Mb/s network adapter
• PXE deployment server (storing boot images)
— Intel Pentium III or higher processor (500 MHz recommended)
— 256 MB of RAM
— 10 Mb/s network adapter
— CD-ROM drive
• NFS repository server (only required for Red Hat Linux deployment)
— Red Hat Linux 7.2 operating system installed
— Network connection
— CD-ROM drive
— NFS installed
— 1.5 GB of available disk space
• Windows repository server (only required for Windows deployment)
— Windows 2000 or Windows 2003 operating system installed
— Network connection
— CD-ROM drive
— 1.5 GB of available disk space
— TCP/IP networking and an IP address compatible with one of the following:
the iLO Diagnostic Port IP address or an assigned DHCP or static IP address
— CD-ROM drive and/or diskette drive
— Any of the following Java Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
5-14 HP ProLiant BL20p Generation 3 Server Blade User Guide
1.4.1 for Windows users only