HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide

Connectors, LEDs, and Switches
4-8 HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
Figure 4-6: Hot-plug SCSI hard drive LEDs
Table 4-5: Hot-Plug SCSI Hard Drive LEDs
1 Activity 2 Online 3 Fault Means
On Off Off
Do not remove the drive. Removing a drive during
this process causes data loss.
The drive is being accessed and is not configured as
part of an array.
On Flashing Off
Do not remove the drive. Removing a drive during
this process causes data loss.
The drive is rebuilding or undergoing capacity
expansion.
Flashing Flashing Flashing
Do not remove the drive. Removing a drive during
this process causes data loss.
The drive is part of an array being selected by the
Array Configuration Utility.
-Or-
The Options ROMPaq is upgrading the drive.
Off Off Off OK to replace the drive online if a predictive failure
alert is received and the drive is attached to an array
controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, a powered-on controller
is not accessing the drive.
-Or-
The drive is configured as an online spare.
continued