HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide

Connectors, LEDs, and Switches
4-4 HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
Table 4-2: System Board Components and Connectors
Item Description
1 Power button/LED board connector
2 SCSI backplane board connector 1
3 Processor socket 2
4 Smart Array 6i Controller
5 Standard NIC Mezzanine card
6 Smart Array 6i 128-MB Battery-Backed Write
Cache Enabler (Optional)
7 Power converter module
8 HP ProLiant BL20p G3 Fibre Channel adapter
9 DC filter module
10 DIMM slots (4)
11 System Battery
12 Processor socket 1 (populated)
13 SCSI backplane board connector 2
14 Fan connectors
Local I/O Cable
CAUTION: Disconnect the local I/O cable from the port when not in use. The port and
connector do not provide a permanent connection. Rear iLO connector performance degrades
when the local I/O cable is in use, even when the iLO connector on the cable is not in use.
Use the local I/O cable to perform some server blade configuration and diagnostic
procedures. The I/O port only accepts the local I/O cable.