HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
Configuring and Deploying Server Blades
• A Fibre-capable interconnect is installed in the enclosureRefer to the
documentation that shipped with the interconnect option
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The enclosure management module firmware is up-to-dateRefer to the
ProLiant BL p-Class support site on
www.hp.com
The server blade is properly cabled to a supported SAN
SAN storage drivers are loadedRefer to supporting white papers and to
www.hp.com/servers/rdp
For SAN configuration information for the server blade, consult the SAN Design
Reference Guide located at
www.compaq.com/products/storageworks/san/documentation.html
Software and Utilities
The following utilities and support tools are available for use in configuring and
deploying the server blade:
Integrated Lights-Out Advanced (iLO Advanced) Management
Redundant ROM Support
ROMPaq Utility
ROM-Based Setup Utility (RBSU)
Option ROM Configuration for Arrays (ORCA) Utility
Network-based PXE Deployment
SmartStart Scripting Toolkit
Insight Manager 7
Diagnostics Utility
Automatic Server Recovery (ASR-2)
Integrated Management Log (IML)
HP also offers the following software components:
2-8 HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
HP CONFIDENTIAL
Writer: Amy Clute File Name: c-ch2 Configuring and Deploying Server Blades.doc
Codename: Nipper Part Number: 307158-00 Last Saved On: 9/8/03 2:12 PM