HP ProLiant BL p-Class System Setup and Installation Guide

HP ProLiant BL p-Class System Setup and Installation Guide 3-1

HP CONFIDENTIAL

Writer: Christine Portillo File Name: d-ch3 Installing System Hardware.doc

Codename: ICE Part Number: 230852-002 Last Saved On: 11/20/02 4:54 PM

Installing System Hardware

This chapter provides installation procedures for the following system infrastructure

components:

• Power enclosures

• Server blade enclosures

• Hot-plug power supplies

• Interconnects and their respective modules

• Bus bars

You can also refer to the installation procedures on the HP ProLiant BL p-Class

System Hardware Installation and Configuration poster.

Installing System Enclosures

To install a power enclosure or server blade enclosure, use the sections in this chapter

to complete the following steps:

1. Measure with the rack template.

2. Install the rack rails and cage nuts.

3. Load the enclosures into the rack.