HP ProLiant BL e-Class System Setup and Installation Guide

Deployment and Management
Two methods allow you to access the redundant ROM:
•
•
Switching to the backup ROM through RBSU
— Using a monitor and keyboard using the diagnostic adapter
— Using the Integrated Administrator
Manually forcing to the backup ROM through the server blade maintenance
switch (SW1)
Switching to the Backup ROM Through ROM-Based Setup Utility
To access the RBSU using the diagnostic adapter:
1. Install the diagnostic adapter onto the server blade.
2. Install a keyboard, mouse, and monitor onto the diagnostic adapter.
3. Access RBSU by pressing the F9 key during power up when the prompt appears
in the lower right corner of the screen.
4. Click Advanced Options.
5. Click ROM Selection.
6. Click Switch to Backup and press the Enter key.
7. Press the Esc key to exit the current menu or press the F10 key to exit RBSU.
8. Power cycle the server.
For details on accessing RBSU through the Integrated Administrator, refer to the HP
ProLiant BL e-Class Integrated Administrator User Guide on the documentation CD
that ships with the enclosure.
HP ProLiant BL e-Class System Setup and Installation Guide 4-7
HP CONFIDENTIAL
Writer: Karen Hale File Name: e-ch4 Configuration and Deployment.doc
Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:08 PM