HP ProLiant BL e-Class System Setup and Installation Guide

Installing and Cabling the System
Removing a Server Blade
To remove a server blade:
1. Press the release latch (1).
2. Pull down the ejector lever (2).
3. Remove the server blade from the enclosure (3).
Figure 3-23: Removing a server blade
HP ProLiant BL e-Class System Setup and Installation Guide 3-29
HP CONFIDENTIAL
Writer: Karen Hale File Name: d-ch3 Installing and Cabling the System.doc
Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:04 PM