ProLiant BL e-Class C-GbE Interconnect Switch Web-based Interface Reference Guide

1
Overview
Introduction
The ProLiant BL e-Class C-GbE Interconnect Switch provides two console management
interfaces and a Web-based management interface. The command line interface (CLI) and
menu-driven interface allow you to set up and control the switch modules using either the
serial or Ethernet ports on the switch. The embedded Web-based (HTML) interface allows
users to manage each switch module from anywhere on the network through a standard
browser, such as Netscape Navigator or Microsoft® Internet Explorer. The Web browser acts
as a universal access tool and can communicate directly with the switch modules using the
HTTP protocol.
NOTE: Your browser window may differ compared with the screen shots in this guide.
The Web-based management interface and the console management interfaces are different
ways to access and configure the same internal switching software. All settings encountered
in Web-based management are the same as those found in the console management program.
This guide describes how to use the Web-based interface to access the switch modules,
change their settings, and monitor their operation.
Additional Information
Additional information about installing and configuring the interconnect switch is available in
the following guides, which are located on the ProLiant BL e-Class C-GbE Interconnect
Switch Management System Utilities and User Documentation CD.
•
•
•
HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference
Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Menu-driven Interface Reference
Guide
HP ProLiant BL e-Class C-GbE Interconnect Switch Web-based Interface Reference Guide 1-1