ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
Modifying Priority Level for a MAC Address
Use the following command to modify a priority level for a MAC address within a specified
VLAN:
Command Description
mac-pri modify
id <vlan_id>
mac <mac_addr>
{
[pri <pri>]
[look-at {src | dest | either}]
}
Modifies an entry in the priority MAC address
table for a specified VLAN
Type the following in the command:
• id <vlan_id>—Type id and the VLAN ID.
• mac <mac_addr>—Type mac and the
MAC address.
Type one or both of the following in the
command:
• pri <pri>—Type pri and a priority level
between 0 and 7. Seven (7) is the highest
priority level.
• look-at {src | dest | either}—Sets the
Look at MAC address filter. Type look-at
and one of the following:
• src—Source MAC address
• dest—Destination MAC address
• either—Either source or destination
MAC address
Displaying Current Priority Level for a MAC Address
Use the following command to display the current priority level for a MAC address:
Command Description
mac-pri show
[vlan <vlanlist>]
Displays current priority level for a MAC address
all VLANS
To display settings for a specified VLAN, type
vlan and the list of VLANs in the command.
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide 2-77