ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
Adding Priority Level for a MAC Address
Use the following command to add an entry into the priority MAC address table and set the
priority level for a MAC address within a specified VLAN:
Command Description
mac-pri add
id <vlan_id>
mac <mac_addr>
priority <pri>
look-at {src | dest | either}
Adds an entry into the priority MAC address
table and sets the priority level for a MAC
address within a specified VLAN
Type the following in the command:
• id <vlan_id>—Type id and the VLAN ID.
• mac <mac_addr>—Type mac and the
MAC address.
• priority <pri>—Type priority and a priority
level between 0 and 7. Seven (7) is the
highest priority level.
• look-at {src | dest | either}—Sets the
Look at MAC address filter. Type look-at
and one of the following:
• src—Source MAC address
• dest—Destination MAC address
• either—Either source or destination
MAC address
Deleting Priority Level for a MAC Address
Use the following command to delete a priority level for a MAC address within a specified
VLAN:
Command Description
mac-pri delete
id <vlan_id>
mac {<mac_addr> | all}
Removes an entry from the priority MAC
address table
For a given VLAN, you can remove a single
MAC address or remove all MAC addresses.
Type the following in the command:
• id <vlan_id>—Type id and the VLAN ID.
• mac {<mac_addr> | all}—Type mac and
MAC address or all to disable all MAC
addresses.
2-76 HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide