ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
Displaying Time Parameters
Use the following command to display the current time parameters:
Command Description
time show
Displays the current switch time, up time or boot
time (whichever is currently active), time zone
settings, and daylight saving time settings
For example:
Enabling SNTP
In order for the switch module to synchronize its real time to the network time, you must first
enable SNTP on the switch. After enabling SNTP, you must set the SNTP parameters.
Use the following command to enable SNTP on the switch module:
Command Description
sntp enable
Enables SNTP
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide 2-41