ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
— System Up Time—Identifies the time the switch booted up, if the current time has
been set on the switch module. If the current time has never been set up on the
interconnect switch, this field identifies the time since the switch module was booted
up.
— Time—Displays the current real time set on the switch module. If the current time
has never been set up on the interconnect switch, “Unknown” will be displayed.
— Time Source—Displays how the switch module obtains the current time: Primary
SNTP Server, Secondary SNTP Server, or System Clock.
— System Name—Displays a user-configured name for the switch module.
— System Location—Displays a user-configured description for the physical location
of the switch module.
— System Contact—Displays the user-configured name of the person to contact if
there are any problems or questions with the switch module.
This example shows the advanced switch features.
— Auto Logout—Displays the time that the RS-232 console and Telnet management
interface can be idle before the switch module automatically logs out the user. For
additional information, refer to the “Configuring Auto-Logout Timer” section later in
this chapter.
— MAC Address Aging Time—Displays the length of time a learned MAC address
remains in the forwarding table without being seen as a source (that is, how long a
learned MAC address is allowed to remain idle before being deleted from the address
table). For additional information, refer to the “Configuring MAC Address Aging
Timer” section later in this chapter.
— IGMP Snooping Status—Displays the Internet Group Management Protocol
(IGMP) snooping status set on the switch module. IGMP snooping enables the switch
module to register IGMP packets being forwarded through the switch module in
order to obtain multicast member information from them, such as which ports are
attached to which multicst members. For additional information, refer to the
“Configuring IGMP Snooping” section later in this chapter.
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide 2-11