ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Commands
Configuring Spanning Tree Protocol
Command Description
stp enable
{
feature |
bypass <portlist> |
port <portlist>
}
Enables STP on the switch module, enables a
port or ports from participating in a single
spanning tree domain, or enables bypass on a
port or ports
stp disable
{
feature |
bypass <portlist> |
port <portlist>
}
Disables STP on the switch module, disables a
port or ports from participating in a single
spanning tree domain, or disables bypass on a
port or ports
stp set
{
bridging
{
[delay <forward_delay>]
[time <hello_time>]
[age <max_age>]
[priority <prio>]
} |
params port <portlist>
{
[priority <port_prio>]
[cost <port_cost>]
}
}
Sets bridging parameters or sets the per port
priority or port cost parameters
stp show
{
[bridging]
[port <portlist>]
}
Displays the STP bridging and per port settings
for all ports
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide A-13