ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Commands
Configuring Port Settings
Command Description
port set
{
label port <port#> name <name> |
params port <portlist>
{
[speed-duplex {auto | 10-half | 10-full |
100-half | 100-full | 1000-full}] |
[flow-control {on | off}] } |
security port <portlist> learn <max#> mode
{timeout | reset}
}
}
Configures the port names, port parameters,
and port security parameters
port enable
{
port <portlist> |
security <portlist>
}
Enables ports or port security on a per port
basis. Disabled ports do not send or receive
any traffic. The default is port enabled.
port disable
{
port <portlist> |
security <portlist>
}
Disables ports or port security on a per port
basis. Disabled ports do not send or receive
any traffic. The default is port enabled.
port clear
{
utilization port <portlist> |
error port <portlist> |
packet port <portlist>
}
Clears the utilization counters, error counters,
or packet counters for a specified port or ports
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide A-11