ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Commands
Configuring Switch Module Date and Time
Command Description
time set
{
[time <time>]
[date <date>]
[time-zone operator {+ | -} hour <gmt_hour>
min <minute>]
[dst {
disabled |
repeating
s-which <start_which>
s-day <start_day>
s-mth <start_mth>
s-time <start_time>
e-which <end_which>
e-day <end_day>
e-mth <end_mth>
e-time <end_time>
offset <offset> |
annual
s-date <start_date>
s-mth <start_mth>
s-time <start_time>
e-date <end_date>
e-mth <end_mth>
e-time <end_time>
offset <offset>
} ]
}
Manually sets the current time, date, time
zone, and daylight saving time (DST)
parameters. SNTP must be set to disabled
to manually set the time.
time show
Displays the current switch time, up time or
boot time (whichever is currently active),
time zone settings, and daylight saving time
settings
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide A-9