ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
Use the following command to set the parameters for TFTP file transfers.
Command Description
tftp set
{
[ip <ip_addr>]
[port <port_num>]
[fw <path_filename> ]
[cfg <path_filename>]
[log <path_filename>]
}
Sets the parameters for TFTP file transfers
Type the following optional TFTP parameters in
the command:
• ip <ip_addr>—Type ip and the IP address
for the TFTP server to use. The <ip_addr>
default is 0.0.0.0.
• port <port_num>—Type port and the port
number to use for the TFTP server. The
<port_num> default is 69.
• fw <path_filename>—Type fw and the path
and filename to use for a firmware file
download command. The path name can
be from 1 to 64 characters in length.
• cfg <path_filename>—Type cfg and the
path and filename to use for a configuration
file upload or download command. The
path name can from 1 to 64 characters in
length.
• log <path_filename>—Type log and the
path and filename to use for a log file
upload command. The path name can be
from 1 to 64 characters in length.
Initiating a TFTP Download for Firmware or Configuration File
IMPORTANT: Configuration files used in the earlier version of the switch module (firmware version
1.0.0) are not supported by the present version (firmware version 2.0.0). Refer to the section
“Displaying Switch Module Information“ for information on how to display the current firmware version.
A configuration file can be downloaded from a TFTP server to the switch module. This file is
then used by the switch module to configure itself. Beginning in firmware version 2.0.0,
switch firmware configuration files are specified in XML format.
Downloaded XML configuration files do not need to specify every possible parameter. Only
the configuration parameters specified will be modified; others will remain unchanged.
NOTE: For additional information, refer to Appendix H, XML Configuration, in the HP ProLiant
e-class C-GbE Interconnect Switch User Guide.
2-84 HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide