ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide

Configuring the Switch Modules using the Command Line Interface
Using System Utilities
The system utilities commands allow you to:
•
•
•
•
•
Upgrade switch module firmware from a Trivial File Transfer Protocol (TFTP) server
Upload the switch configuration settings to a file on a TFTP server
Download the switch configuration settings from a file on a TFTP server
Send the History Log to the TFTP server
Perform a PING connectivity test
Setting TFTP
Trivial File Transfer Protocol (TFTP) services allow the switch firmware to be upgraded by
transferring a new firmware file from a TFTP server to the switch module. A configuration
file can also be loaded into the switch module from a TFTP server, switch module settings
can be saved to the TFTP server, and a history log can be uploaded from the switch module to
the TFTP server.
IMPORTANT: The TFTP server must be running TFTP server software to perform a file transfer. TFTP
server software is included with the interconnect switch as part of the utilities package.
NOTE: A downloadable smart component, which further simplifies upgrading the GbE Interconnect
Switch firmware, is available at the following website:
www.compaq.com/support/servers
The following shows the TFTP factory default settings:
Feature Default Value
TFTP Server IP Address 0.0.0.0
TFTP Port Number 69
FW Filename None
CFG Filename None
Log Filename None
HP ProLiant BL e-Class C-GbE Interconnect Switch Command Line Interface Reference Guide 2-83