WESM zl 12 and 48 Radio-Port License Installation Guide 2007-07

3
General Procedure
The general procedure for managing radio-port licenses
involves several different numbers:
O registration ID — This number came with the license
you purchased, and represents your right to install a
particular type of license on a particular type of
network device.
O hardware ID — This number identifies the ProCurve
Wireless EDGE Services zl Module that you are
licensing, and includes the module's serial number
and an identifier for the premium feature that you
are licensing.
O license key — This number is generated by the My
ProCurve portal, based on a registration ID and a
hardware ID. When you install this number into your
ProCurve Wireless EDGE Services zl Module, it
enables the radio ports that you are licensing.
O uninstall verification key — This number is
generated if you uninstall a radio-port license from a
ProCurve Wireless EDGE Services zl Module. You
can use it to generate a new registration ID on the
My ProCurve portal, which allows you to transfer the
license to a different module. If you are using the
manual method, you will work with these numbers
using both the My ProCurve portal (through your
Web browser) and the module’s Web browser
interface or CLI. If you are using the ProCurve
Manager method,you will work with these numbers
using PCM. Details follow in the next two chapters.