HP VPN Firewall Module Series - HP SECBLADEIII-CMW520-R3819P01 Release Notes

 Workaround: Configure the two cards to enter synchronization state, and then create

the Layer-3 subinterface or Layer-3 aggregate subinterface.

HSD110063

 Symptom: When configuration synchronization is enabled between the active and

standby SecBlade cards, new physical interface type configuration on the active card

cannot be synchronized to the standby card.

 Condition: This symptom can be seen when configuration synchronization is enabled

between the active and standby SecBlade cards.

 Workaround: Manually modify the interface type configuration on the standby card.

HSD100621

 Symptom: After the attack defense settings configured at the CLI are removed from

the Web interface and then the SecBlade card is rebooted, the attack defense

settings still take effect.

 Condition: This symptom can be seen after the attack defense settings configured at

the CLI are removed from the Web interface and then the SecBlade card is rebooted.

 Workaround: Remove the attack defense settings at the CLI.

HSD113033

 Symptom: The SecBlade card might reboot when a display command with a regular

expression (for example, display current-configuration | include .*.*.*/.) is executed to

display a configuration file that exceeds 100 KB.

 Condition: This symptom occurs if a display command with a regular expression (for

example, display current-configuration | include .*.*.*/.) is executed to display a

configuration file that exceeds 100 KB.

 Workaround: When the configuration file is larger than 100 KB, do not use any regular

expression, or use a regular expression that does not include "*" or includes few "*".

List of resolved problems

Resolved problems in R3819P01

201401140211

Symptom: The device can't startup normally.

Condition: Test under the ESS (Environment Stress Screen) low temperature lab.

Resolved problems in R3819

201308300271

 Symptom: A PC running Win7 obtains an incorrect DNS server address from the DHCP

server on the SecBlade card.

 Condition: This symptom occurs if multiple DHCP address pools are configured, and

the PC's MAC address is bound to a static address pool on the SecBlade card.

201308290004

 Symptom: The SecBlade card unexpectedly reboots during a CRL acquisition

operation.