HP Switch Services Modules - HP SECBLADEII-CMW520-F3171P05 Release Notes

HP SECBLADEII-CMW520-F3171P05
Release Notes
Hewlett-Packard Development Company, L.P.
9
ICMP fragment sending restriction
Pinging the firewall card from a PC by using ICMP echo packets larger than 35000 bytes
may fail. In such a ping operation, the large ICMP reply is fragmented based on the
interface MTU, and a large number of fragments overwhelm the sending interface.
Without QoS queue support, fragment drop occurs. As a result, the PC cannot receive the
complete fragments to reassemble the ICMP reply.
Web display restriction
The web interface can display at most 5000 records of configuration information. If your
configuration, such as the session information, exceeds 5000 records, the web interface
cannot display the entire configuration. In this case, you can set filters to display only
interested information.
Software restriction
On the fixed 4GE and 10GE ports working in Layer 2 mode, if the sub-interface number and
the ID of the VLAN that holds the sub-interface are the same, transmitting multicast packets
will result in MAC address move on the downstream switch.
Bridge mode restriction
Ethernet interfaces working in bridge mode (Layer 2 mode) do not support loopback
detection.
Hardware restriction
The USB hardware on SecBlade II is a reserved module, and the software does not support it
at present.
Feature list
Hardware features
Table 3 Hardware features
Item Description
Applied to A5800 A7500 A9500 A12500 A6600 A8800
Dimensions (H × W
× D)
36.7×250.0×
249.8mm
(1.44×9.84×
9.83in)
40.1×399.2
×376.8mm
(1.58×15.7
2×14.83in)
40.1×399.2
×379.0mm
(1.58×15.7
2×14.92in)
40.1×399.2
×498.8mm
(1.58×15.7
2×19.64in)
45.2×399.2
×434.6mm
(1.78×15.7
2×17.11in)
40.1×399.2
×379.0mm
(1.58×15.7
2×14.92in)
Weight
1.5kg (3.31
lb)
3.23kg
(7.121lb)
3.6kg
(7.94lb)
4.3kg
(9.48lb)
3.5kg
(7.72lb)
3.6kg
(7.94lb)
Rated power
consumption
58.4W 107.12W 113.68W 125.2W 104.14 113.68W
DDR2 SDRAM 2GB 4 GB (default), 2 GB (compatible)