HP Switch Services Modules - HP SECBLADEII-CMW520-F3171P05 Release Notes

HP SECBLADEII-CMW520-F3171P05

Release Notes

Hewlett-Packard Development Company, L.P.

Item Specifications

A8800 version AR8800-CMW520-R3343

IMC version iMC PLAT 5.0 SP1 (E0101L07)

SecCenter Firewall Manager SecCenter Firewall Manager E0027

Sample: To display the host software and BootWare version of the SecBladeII card, perform

the following command:

<HP>dis version

HP Comware Platform Software

Comware Software, Version 5.20, Feature 3171P05

HP SecBlade FW uptime is 0 week, 0 day, 0 hour, 7 minutes

CPU type: RMI XLR732 1000MHz CPU

3584M bytes DDR2 SDRAM Memory

4M bytes Flash Memory

247M bytes CF0 Card

PCB Version:Ver.A

Logic Version: 3.0

Basic BootWare Version: 1.28

Extend BootWare Version: 1.50

[FIXED PORT] CON (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] GE0/4 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

[FIXED PORT] XGE0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0

Restrictions and cautions

Release upgrade restrictions

Before you upgrade the firewall card from the F3166, R3166, or F3169 release series to the

F3171 release series, understand the following restrictions:

1. If static NAT, NAT address group, and NAT server are configured on an interface of the

firewall card, and the NAT global addresses are not in the same subnet as the

interface’s address, the interface does not respond to the ARP requests for the NAT

global addresses by default. For the interface to respond to such ARP requests,

configure for the interface sub-addresses that are in the same subnet as the NAT

global addresses.

2. Release F3171 does not support characters ! # ? @ ~ ( ) in the names of address

resources (including host addresses, address ranges, and subnet addresses),

user-defined service resources, and service group resources. If the current version of

the firewall card supports these characters, you must replace them with other

characters in the names before upgrading the firewall card to release F3171.