HP Switch Services Modules - HP SECBLADEII-CMW520-F3171P05 Release Notes

HP SECBLADEII-CMW520-F3171P05

Release Notes

Hewlett-Packard Development Company, L.P.

• Description: When the firewall resumes normal traffic level, the occupied memory

cannot be reclaimed in time.

Problem 4 HSD96862

• Condition: Enable the user log function.

• Description: The user log data sent to the log host is not complete, and contains

20-byte invalid data.

Problem 5 HSD97292

• Condition: None

• Description: The firewall’s internal 10GE interface rate statistics are incorrect.

Resolved problems in

SECBLADEII-CMW520-F3171P02

Problem 1 HSD95817

• Condition: None

• Description: If the memory occupation is too high, processes may lock each other,

resulting in a device reboot.

Problem 2 HSD93926

• Condition: None

• Description: After you failed to modify an address group object, clicking the interzone

policy in the navigation tree will result in an abnormal device reboot.

Problem 3 HSD92124

• Condition: None

• Description: After FIN packets pass through the firewall in opposite directions, the

firewall will drop the FIN packets in one direction.

Problem 4 HSD94491

• Condition: None

• Description: Importing IP address and address group resources results in device stack

reboots.

Problem 5 HSD94379

• Condition: None

• Description: Connect an SNMPTest to the firewall. The SHA-3DES mode results in a

device fault.

Problem 6 HSD95197

• Condition: None

• Description: After the memory occupation of sessions rises to a peak, the occupied

memory is not released even if the number of sessions decreases.