HP Switch Services Modules - HP SECBLADEII-CMW520-F3171P05 Release Notes

HP SECBLADEII-CMW520-F3171P05

Release Notes

Hewlett-Packard Development Company, L.P.

Configuration changes

None

Open problems and workarounds

Problem 1 HSD76879

• First found-in version: F3170

• Description: For cross-VPN forwarding, if there is a cross-VPN route iteration loop,

shutting down the interface or deleting the interface address will trigger a cross-VPN

routing loop. The firewall CPU usage rate reaches 100% and responses to CLI

operations are very slow.

• Workaround: Avoid cross-VPN route iteration loop.

Problem 2 HSD96450

• First found-in version: F3170

• Description: The firewall operates in high temperatures for a long time, but the system

generates only one alarm when the temperature exceeds the threshold. No constant

alarms are given.

• Workaround: After the firewall prompts a high temperature alarm, it may stay in high

temperatures for a long time. You must pay attention to the temperature until it drops

to the normal value.

Problem 3 HSD98186

• First found-in version: F3171P03

• Description: The firewall cannot send user logs to the IPv6 log host through a Layer 3

sub-interface.

• Workaround: Send user logs through a physical interface or send them to the IPv4 log

host.

List of resolved problems

Resolved problems in

SECBLADEII-CMW520-F3171P05

Problem 1 HSD099666

• Condition: Deploy two firewalls for stateful failover, and then inject large amounts of

traffic for a long time.

• Description: The firewalls reboot abnormally.

Problem 2 HSD98455

• Condition: Upgrade the firewall from version F3166, R3166, or F3169 to version F3171.