EPS 2011-04

6-2

Troubleshooting

Troubleshooting the 600/610

■ Power limitations. Be sure to understand the power limitations of the

HP 600 RPS/EPS and HP 610 EPS when connecting switches. An overload

condition on a port causes the port to be shut down. For more information

regarding power limitations see:

• the installation and getting started guide for your particular switch

• chapter 1 of this manual

•the HP Power over Ethernet (PoE/PoE+) Planning and Implemen-

tation Guide

Note Use caution when power cycling the HP 600 RPS/EPS or HP 610 EPS as this

may affect devices receiving operating power from the unit.