EPS 2011-04

1-6

Introducing the HP 600 Redundant and External Power Supplies

Supported Switches

For example, the 600 RPS/EPS can allocate 408 W of power to port 1 and none

to port 2, or each port can be allocated 204 W.

If power is shared between the two EPS ports, current limits are set to prevent

an over-current condition. An over-current condition causes the port power

to be shut down. Also, EPS power may not be delivered if a connected switch

has not successfully requested EPS power.

Supported Switches

For a current list of supported HP switches, see www.hp.com/networking/

support, and enter the document titled <name of document> in the Search field,

Redundant and External Power Supplies Cross Reference Guide for HP

ProCurve Stackable Switches. This document defines which power supplies

are supported on which switches.