3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

56 CHAPTER 4: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION
Configuring FTP/Telnet
User Local
Authentication
n
Configuring local authentication for FTP users is similar to that for Telnet users. The
following example is based on Telnet users.
Network requirements
Configure the module to authenticate the login Telnet users at the local (see
Figure 10).
Network diagram
Figure 10 Network diagram for Telnet user local authentication
Configuration procedure
1 Telnet User
IP address: 10.0.0.1/24.
Gateway: 10.0.0.254.
2 Switch 8807 (SecBlade)
# Divide VLANs.
<SW8800> system-view
[SW8800] vlan 10
[3Com-vlan10] quit
[SW8800] vlan 30
[3Com-vlan30] quit
[SW8800] vlan 50
[3Com-vlan50] quit
Firewall
S8800