HP Power Protector User Guide

Configuration and operation 73
• UPS status icon—The current UPS status
Status icon Description
Normal operation
Alarm present
Click the icon to display the UPS alarms.
UPS communication loss
• Description—The name of the UPS
• Firmware version—The UPS firmware version
• Nominal apparent power—The UPS nominal apparent power (in VA or KVA)
• IP address or DNS name—The IP address or DNS name of the UPS that powers the server running HP
Power Protector
This information is only available for HPPP Clients.
• Serial number—The UPS serial number
• Class—The device type, for example, RS-232 device, USB device, or HPPP Administrator
• Link—A hyperlinked icon that directs you to the web interface for the HP UPS Network Module, if
installed, or the HPPP Administrator ( HTTP Connection, HTTPS Connection, or
Communication Loss)
• Battery state—The current state of the UPS battery (Charging, Discharging, or Fault)
• Power source—The current source of UPS power (AC Power or Battery Power)
• Load level—The current UPS output load level
• Battery capacity—The remaining UPS battery capacity
• Battery runtime—The remaining backup time available from the UPS battery
• Entire UPS—The status of the UPS ( On, Off, Unknown, Internal Failure, On Automatic
Bypass, Manual Bypass, Overload)
• Load segment—The load segment status ( On, Off, or Unknown)