HP Power Protector User Guide

Installation 33
Installing HPPP on HP-UX operating systems
HPPP can be installed using the SAM or Generic Package installation option on any supported HP-UX
operating system. To ensure that your system meets the minimum requirements, see "System requirements (on
page 18)."
Installing HPPP locally using the Generic Package method
NOTE: Before installing the software, be sure that the serial cable connecting the UPS to the
server is properly installed.
To install HPPP using the Generic Package:
1. From the command line, execute the following command:
./hppp—hp-ux-x_y_z-ia64 -install
2. Verify that the device communication is connected, and then enter Y to proceed with the installation.
3. Press Enter to use the default installation path or enter the new installation path, and then press Enter.
4. Enter Y to confirm the install directory.
5. After the installation is complete, launch a supported browser. The browser window appears.
6. In the URL field, enter:
http://<ipaddress>:4679 (for a standard connection)
-or-
https://<ipaddress>:4680 (for a secure connection)