User Guide

Printing to a network connected printer
Network printers must be directly connected to the network. The Wireless Dock Base
cannot print to printers that are connected to computers on the network. The Wireless
Dock Base will see up to 10 network connected printers.
1. Locate the image you want to print and select it.
Tip If you just press , all photos found will be automatically printed.
2.
Press the Print
button on the remote.
3. Choose one of the following and press OK.
– 4 x 6 prints
– Enlargements
– Go directly to print summary
4. Choose any desired settings and press OK to go the Print Summary.
The Print Summary shows the printer that is currently selected.
5. If necessary, change printers then press OK to print.
Print Wizard
When you select the photo a green box appears around the image. You can use the
Zoom In and Zoom Out buttons to resize the photo and the arrow buttons to move it
around in the box. Only the portion that appears in the box will be printed.
After you press the Print button, you can choose between 4 x 6 prints or Enlargements
4 x 6 prints
Paper Size
● Letter
● 4 x 6 inches
Use the arrow buttons to
set the number of copies
and press OK.
Enlargements Paper Size
● Letter
● 5 x 7 inches
● Letter
– 2 per page
– 8 x 10 inches
– 1 per page
(borderless)
● 5 x 7 inches
User Guide
35