User Guide

4
Transfer and print images
You can use your dock to transfer images to a computer and to print them directly to a
printer.
Transferring images to a computer
The way you transfer images may vary somewhat depending on the following factors.
● Windows or Mac computer
● Version of the operating system
● Whether or not the HP Photosmart Software is installed
Note If you are using Windows 98 or Me, you must install the HP
Photosmart Software to transfer images.
● Whether the camera's USB Configuration is set to Digital Camera or Disk
Drive. Refer to your camera electronic User Guide for more information.
1. Place the HP camera in the dock and turn it on.
2.
Press either the
on the HP Premium Dock or the button on the remote.
3. Follow the directions on your computer screen. Refer to the on-screen help for
more information.
Save photos to your computer
After you take photos with your digital camera, you can view them on your television
or save them to your computer. To save them to your computer, you can dock the HP
camera or remove the memory card from the camera and insert it in the memory card
slot on the HP Wireless Dock Base. You can also set the camera to storage mode
and connect it to the front USB port to save the photos to your computer.
For information about connecting a digital camera that is in storage mode, see USB
storage device. For more information about inserting memory cards, see Secure
digital card.
You can also use the HP Photosmart Software to import images to your computer.
For more information, see the HP Photosmart Transfer Software section of the
HP Photosmart Mac Help.
To save photos
1. Dock the camera, insert a memory card into the appropriate slot on your
HP Wireless Dock Base, or connect a storage device to the front USB port.
The light blinks when the files are accessed.
User Guide
33