User Guide

To select photos
1. If necessary, connect the device containing the photos to the Wireless Dock Base.
2.
Use the

to select the device menu or Shared Network Folders menu and
press OK.
3. Select All or the folder you wish to explore and click OK.
4.
Use the

buttons to scroll to the photo you want to select.
5. Press OK to select the photo currently shown on the television.
A check mark appears next to the selected photo.
6. Repeat the previous steps to select as many photos as you want.
To deselect a photo
➔
Press OK to remove the check mark.
View photos
You can view single photos or slideshows of your images on the television connected
to your HP Wireless Dock Base.
1. Connect the device containing the photos to the HP Wireless Dock Base or
connect to Snapfish.
2.
Use the

to select the location of the photos and press OK.
3. Select All or the folder you wish to explore and click OK.
Tip If you just press , all photos found will be automatically shown in a
slideshow.
4.
Press

on the remote until the photo you want to view appears on the
television.
1. Dock the camera, insert the memory card into the slot, or connect a storage
device to the front USB port on the HP Wireless Dock Base.
2. The highlight will show the most recently attached image source. If necessary,
use the

to select the source you want to use now and press OK.
3. Select All or the folder you wish to explore and click OK.
4. Press
on the remote to start or pause the slideshow.
5. Press Back
to end the slideshow.
User Guide
31