User Guide

Digital camera using PictBridge
The HP Wireless Dock Base supports the PictBridge mode, which enables you to
connect any camera in PictBridge mode to the front USB port. See the documentation
that came with your camera to find out if it supports PictBridge.
Tip You cannot connect a camera to the front USB port in PictBridge mode at
the same time you have an HP camera docked in the Premium Camera Dock.
Remove the HP camera from the Premium Camera Dock before attaching the
PictBridge camera to the front USB port.
The front USB port is located next to the memory card slot:
If your camera is not in PictBridge mode or does not support PictBridge, you can still
access photos in the camera by using the camera in storage device mode. For more
information, see USB storage device.
1. Connect your camera to the front USB port on your HP Wireless Dock Base using
the USB cable supplied with your camera.
2. Turn on your camera and make sure it is in PictBridge mode.
Tip If the camera is in PictBridge mode, the camera icon will be
highlighted. If the USB icon is highlighted, the camera is in storage mode.
Note Check your camera documentation to verify how to change the
USB mode to PictBridge. Different cameras use different terms to
describe PictBridge mode. For instance, some cameras have a digital
camera setting and a disk drive setting. In this instance, the digital
camera setting is the PictBridge mode setting.
Select photos
The first thing to do when you want to work with any image is to select the photos.
Chapter 3
30
HP Photosmart 6222 Wireless Dock Base