User Guide

Set the language and country/region

The software in your Wireless Dock Base is available in the following languages:

English, French, Italian, German, Spanish, Dutch, and Portuguese. Select the

language that best meets your needs.

Caution Regardless of the language you choose, you MUST select the

correct country/region where you are located. The country/region selection

sets the radio frequency for your Wireless Dock Base. Failure to select the

proper country can cause the Wireless Dock Base to not function. In some

areas, having the wrong radio frequency selected could be illegal.

1. Click the Setup button.

2. Select System Setup Wizards and press OK.

3. Select Language and Region Wizard and press OK.

4. Select your language and press OK.

5. Press OK again to confirm your selection.

6. Use the arrow keys to scroll through the list and select the country/region in which

you are located and press OK.

Advanced network setup

Note Only experienced users should change these settings.

The Advanced Setup menu allows you to change the following items.

● Turn the Wireless Radio on and off.

● Change or reset the IP Settings automatically or manually. The manual setting

allows you to change the following items.

– IP Address

– Subnet Mask

– Default Gateway

– Preferred DNS Address

– Alternate DNS Address

Network glossary

ASCII American Standard Code for Information Interchange. The

standard for numbers used by computers to represent all the

uppercase and lowercase Latin letters, numbers, punctuation, etc.

AutoIP A feature of the installation software, which determines the

configuration parameters of devices on the network.

DHCP Dynamic Host Configuration Protocol. A server on the network

that supplies configuration parameters to devices on the network.

On small networks, this could be a router.

DNS Domain Name Service. When you use the web or send an e-mail

message, you use a domain name to do it. For example, the URL

Chapter 2

HP Photosmart 6222 Wireless Dock Base