User Guide

3. Your camera, SD card, or USB storage device will be the source for the TV signal
(just like a VCR or a camcorder), so you must set the TV to take video input from
an external video source (the wireless dock base) instead of the antenna or cable
TV. Refer to the TV user guide for directions on how to do this.
Connecting to your wireless network
You must connect your Wireless Dock Base to your network using your TV before you
attempt to use it with your computer.
First: Connect to the network
1.
From the TV main menu, click Setup
on the remote or the Setup button on the
screen.
2. Select Local Network and press OK .
3. Select Wireless Setup Wizard and press OK .
4. The device searches for available wireless networks and lists them on the TV
screen.
Select your network and press OK .
If you have your wireless router set to not broadcast its name, you must select
Enter New Network Name (SSID) and press OK . Then you must manually
enter the network name using the onscreen keyboard.
The online keyboard will display for you to enter your security key.
5. Use your remote and the online keyboard to enter your security key and click Done.
Note We strongly encourage you to secure your network. An unsecure
network not only allows others to access your shared files, but other
people using your network will slow down your response time.
Chapter 2
20
HP Photosmart 6222 Wireless Dock Base