9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Question Answer
PPU Report Transfer to HP (Only provide answers for one transport method below: email or
https)
If transport of the URS Usage Data is through
email:
1. Hostname and domain name of Internet
mail relay host
2. What is the masqueraded domain to
create the “Return address” for the
emails?
3. Does the Internet mail relay specified in
(1) accept to send emails coming from the
Utility Meter under account “umeter”?
4. Is the SMTP AUTH protocol implemented
on the Internet mail relay specified in (1)?
5. Is Transaction Layer Security (TLS)
implemented on the Internet mail relay
specified in (1)?
1.
2.
3. Yes / No
4. Yes / No
5. Yes / No
If the transport of PPU Usage Data is through
https:
1. TCP port 443 has to be open in the firewall
of the customer for traffic from the PPU
Utility Meter to HP. Is this port opened?
If a proxy server is used to relay data to the
outside world:
1. Hostname and domain name of the proxy
server
2. Proxy server port number
3. Username/password
[1]
to cross the proxy
server
1. Yes / No
1.
2.
3.
If the PPU partitions and the Utility Meter are
separated by a firewall, TCP port 5989 must be
open on the firewall. Is this port opened on the
firewall?
Yes / No / Not relevant
Problem Reporting
Email address of customer contact to be
informed when PPU Usage Reports do not
arrive at HP.
If multiple people need to be informed, provide
HP Pay per use Utility Meter II Software (9.6)Page 60 of 65
Installation and Configuration Guide
Appendix B. Site Preparation Form for Utility Ready Storage