9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Appendix A. Site Preparation Form for
Pay Per Use
Use the Utility Meter Site Preparation Form to plan the configuration of the Utility Meter PPU
installation. Items of interest are:
l You can have up to 10 email addresses for the Meter Contact Email. HP recommends
using an email alias or an email distribution list as the contact address for your Utility Meter.
l Ensure that the network's DNS server(s) tables contain the IP address and hostname of the
Utility Meter.
l If the data transport method is email, add the Utility Meter to the access list of the selected mail
server.
The form below is for Utility Meter software version 9.6. It needs to be completed by the customer
and returned to their local HP contact before the PPU installation starts. Please use one form per
Utility Meter.
Question Answer
Networking Details
Fully Qualified Domain Name for the Utility
Meter
Configure the Utility Meter using Static or
DHCP configuration?
Static / DHCP
If using Static network configuration:
1. Static IP address for LAN interface on the
Utility Meter
2. Network mask for IP address above
3. IP address for gateway to Internet
4. IP address of first DNS server for the
Utility Meter
5. IP address of second DNS server
(optional)
1.
2.
3.
4.
5.
Time zone
UTC offset for local time zone
HP Pay per use Utility Meter II Software (9.6)Page 55 of 65