9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Installing Using a CD 16
Installing Using Integrated Lights-Out 17
Configure the Utility Meter Parameters 18
Configuring the Utility Meter Parameters from the Command Line 19
Configuring the Utility Meter Parameters from the GUI 20
URS EVA Only – Install the CV EVA SSSU Software 23
URS XP Only – Install the CVAE CLI Software 23
Avoiding CVAE Device Manager Refresh Conflicts 24
Configuring Devices 25
Add Devices 25
Adding a PPU WBEM Partition/Server 25
Add a PPU WBEM Partition/Server from the GUI 25
Add a PPU WBEM Partition/Server from the Command Line 26
Adding an EVA Storage Array 27
Add an EVA Storage Array from the GUI 27
Add an EVA Storage Array from the Command Line 28
Adding an XP Storage Array 28
Add an XP Storage Array from the GUI 28
Add an XP Storage Array from the Command Line 29
Adding a 3PAR Storage Array 30
Add a 3PAR storage array from the GUI 30
Add a 3PAR Storage Array from the Command Line 31
Modify Devices 32
Modifying a PPU WBEM Partition/Server 32
Modify a PPU WBEM Partition/Server from the GUI 32
Modify a PPU WBEM Partition/Server from the Command Line 33
Modifying an EVA Storage Array 34
Modify an EVA Storage Array from the GUI 34
Modify an EVA Storage Array from the Command Line 35
Modifying an XP Storage Array 35
Modify an XP Storage Array from the GUI 35
Modify an XP Storage Array from the Command Line 36
HP Pay per use Utility Meter II Software (9.6)Page 4 of 65
Installation and Configuration Guide
Contents