9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Installation and Configuration Guide
Chapter 3: Configuring Devices
$ umadmin list
List of devices -
Device Name = deviceName
Type = URSXP
Address = IPAddress
Device ID = deviceID
Info = info
Path = path
Model = model
Serial = serial
Enabled = enabled
You should see the XP array listed with the modified values.
Modifying a 3PAR Storage Array
Modify a 3PAR Storage Array from the GUI
To modify a 3PAR array using the GUI, complete the following steps:
1. Open a browser and enter the Utility Meter's fully qualified domain name into the address bar.
2. Log on to the Utility Meter as user umeter (default password: h.lnxmtr).
3. Select the Device Management tab, select the device to be modified and click Modify
Device.
4. Using the Modify Devices form, modify the following information:
n New 3PAR Inform Info – (optional text to be associated with this 3PAR Inform OS) Enter a
description for the 3PAR Inform OS.
HP Pay per use Utility Meter II Software (9.6)Page 37 of 65