9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Installation and Configuration Guide
Chapter 3: Configuring Devices
n 3PAR InForm IP/Hostname – Enter either the IP address or hostname of the 3PAR
InForm OS server.
n 3PAR Device Name – Enter the user-friendly name of the disk array.
n 3PAR InForm Info – Enter a description for the Inform OS server (optional text to be
associated with this Inform OS server).
n 3PAR Model Number – In the drop-down list, select the appropriate model number.
n 3PAR Serial Number – Enter the serial number of the disk array.
n Username for 3PAR InForm – Enter the username of the 3PAR InForm OS application on
the 3PAR InForm OS machine. Contact the System Administrator or HP engineer who
installed 3PAR InForm OS for the username.
n Password for 3PAR InForm – Enter the password of the 3PAR InForm OS application on
the 3PAR InForm OS machine. Contact the System Administrator or HP engineer who
installed 3PAR InForm OS for the password.
6. Click Add.
7. Verify the 3PAR was added by checking for it in the left menu tree.
Add a 3PAR Storage Array from the Command Line
To add a 3PAR array using the command line, complete the following steps:
1. Log on to the Utility Meter as user umeter (default password: h.lnxmtr).
2. Add the 3PAR array using the following command:
$ umadmin adddev -name deviceName -type URS3PAR -address IPAddress
-username userName -model model -serial serial [-info info]
HP Pay per use Utility Meter II Software (9.6)Page 31 of 65