9.6 HP Pay per use Utility Meter II Software Installation and Configuration Guide (October 2012)

Chapter 3
Configuring Devices
Add Devices
Adding a PPU WBEM Partition/Server
Important: For a Superdome 2 server, both the Onboard Administrator (OA) and the partitions it
manages need to each be added as separate devices.
Add a PPU WBEM Partition/Server from the GUI
To add a PPU WBEM Partition/Server using the GUI, complete the following steps:
1. Open a browser and enter the Utility Meter's fully qualified domain name into the address bar.
2. Log on to the Utility Meter as user umeter (default password: h.lnxmtr).
3. Select the Device Management tab and click Add Device.
4. Select PPU WBEM Partition/Server from the Device Type drop-down list.
5. Enter the information about the PPU WBEM Partition/Server in the Add Device form:
HP Pay per use Utility Meter II Software (9.6)Page 25 of 65