9.3 HP Pay per use Utility Meter II Software Installation and Configuration Guide (July 2011)

1. The Utility Meter has an iLO2 board built in. Please configure network access to the iLO2 board upfront
and have its username/password available during installation. A configured iLO2 board helps also in
the troubleshooting at a later stage.
2. The configuration of the Utility Meter software requires a browser (MSIE, Firefox) or a console to
complete the configuration of URS.
B.1 Networking Details on the Windows Server Running Command View
EVA
URS needs Command View EVA to inventory EVA arrays. Please fill out the table below for details in it. If
multiple Command View EVA instances will be in use, please duplicate this page and complete one table
per instance.
AnswerQuestion
IP address or hostname of the Windows server running Command
View EVA that is controlling one or more EVA disk arrays under
a URS contract
Username/password
1
for an account on the Command View EVA
instance that belongs to the Windows group called HP Storage
Users
1 For security reasons, this information can be made available at the time of installation only.
NOTE: The SMI-S and the Performance Monitoring services in CV EVA are not needed for URS and should
not be installed.
B.2 Networking Details on the Windows Server Running Command View
Advanced Edition or Array Manager Software
URS uses HP StorageWorks Command View Advanced Edition (CVAE) or Array Manager to inventory XP
arrays. Please fill out the table below for details on it. If multiple CVAE or Array Manager instances will be
in use, please duplicate this page and complete one table per instance.
AnswerQuestion
IP address or hostname of the Windows server running HP
StorageWorks Array Manager or Command View Advanced
Edition that is controlling one or more XP disk arrays under a URS
contract
Username/password
1
of an account in the above HP
StorageWorks Array Manager or CVAE instance with “Modify”
privileges
Username/password
1
of the Remote Web Console application
controlling the XP array
1 For security reasons, this information can be made available at the time of installation only.
B.3 Networking Details on the Windows Server Running the 3PAR InForm
OS Software
URS uses 3PAR InForm OS software to inventory XP arrays. Please fill out the table below for details on it.
If multiple 3PAR InForm OS software instances will be in use, please duplicate this page and complete one
table per instance.
AnswerQuestion
IP address or hostname of the Windows server running 3PAR
InForm OS software that is controlling one or more 3PAR disk
arrays under a URS contract
Username/password
1
of an account in the above 3PAR InForm
OS software instance with "Browse" privileges
52 Site Preparation Form for Utility Ready Storage