9.3 HP Pay per use Utility Meter II Software Installation and Configuration Guide (July 2011)

Device deviceName modified successfully.
3. Verify the XP array was modified by listing the devices that are being monitored by the Utility Meter:
$ umadmin list
List of devices -
Device Name = deviceName
Type = URSXP
Address = IPAddress
Device ID = deviceID
Info = info
Path = path
Model = model
Serial = serial
Enabled = enabled
You should see the XP array listed with the modified values.
3.2.4 Modifying a 3PAR Storage Array
3.2.4.1 Modifying a 3PAR Storage Array from the GUI
Use the following procedure to modify a 3PAR array using the GUI:
1. Open a browser and enter the Utility Meter's fully qualified domain name into the address bar.
2. Log on to the Utility Meter as user umeter (default password: h.lnxmtr).
3. Select the Device Management tab, select the device to be modified and click Modify Device.
4. The following information can be modified using the Modify Devices form:
• New 3PAR Inform Info – (optional text to be associated with this 3PAR Inform OS) Enter a description
for the 3PAR Inform OS.
• Is URS Device? checkbox – A usage report will be created for each array that has this box checked.
It provides a way to temporarily stop usage reports from being created.
5. Click Modify.
3.2.4.2 Modifying a 3PAR Storage Array from the Command Line
Use the following procedure to modify a 3PAR array using the command line:
3.2 Modifying Devices 35