9.3 HP Pay per use Utility Meter II Software Installation and Configuration Guide (July 2011)

Device deviceName added successfully.
4. Verify the 3PAR array was added by listing the devices that are being monitored by the Utility Meter:
$ umadmin list
List of devices -
Device Name = deviceName
Type = URS3PAR
Address = IPAddress
Device ID = deviceID
Info = info
Model = model
Serial = serial
You should see the 3PAR array that you added in Step 2 listed.
3.2 Modifying Devices
3.2.1 Modifying a PPU WBEM Partition/Server
3.2.1.1 Modifying a PPU WBEM Partition/Server from the GUI
Use the following procedure to modify a PPU WBEM Partition/Server using the GUI:
1. Open a browser and enter the Utility Meter's fully qualified domain name into the address bar.
2. Log on to the Utility Meter as user umeter (default password: h.lnxmtr).
3. Select the Device Management tab, select the device to be modified and click Modify Device.
4. The following information can be modified for a PPU WBEM Partition/Server using the Modify Devices
form:
• New Device Info – (optional text to be associated with this device) Enter a description for the PPU
WBEM Partition/Server.
• Username – Enter the username of the PPU WBEM Partition/Server.
• Password – Enter the password of the PPU WBEM Partition/Server.
5. Click Modify.
3.2 Modifying Devices 31