9.3 HP Pay per use Utility Meter II Software Installation and Configuration Guide (July 2011)

• Additional fields in URS usage reports sent to HP for display on the Web Portal to provide additional
information (than provided by Utility Meter 8.17) on a URS device.
• Support for CVAE 7.0 for XP devices.
• Tighter version checking of CV CLI and CVAE versions for XP devices.
• The latest supported CLI and SSSU versions are automatically installed (user only needs to install older
versions if needed).
• Upgrade path to facilitate future installation of Utility Meter releases.
1.3 What Has Been Fixed in Version 9.3
Version 9.3 of the Utility Meter software includes the following fixes:
• QC 1104 “After an unexpected abort, restarting the ucd does not correctly initialize the filesystem”.
• QC 1329 “e2etest dumps core checking connectivity to HP”.
• Changing the date (via GUI/umadmin) always sets year to 2010.
1.4 Known Issues
Version 9.3 of the Utility Meter software has the following known issues:
• You can't run an end-to-end from the GUI. See Section 3.3.2: “Running the End-to-End Test”) for how
to run an end-to-end test from the command line.
• You can't use the umadmin collect command to force collections for PPUSD1 devices.
• The umadmin collect -all command always runs assuming -nowait was specified.
• When adding a PPU WBEM Partition/Server the Device Name should be the first part of the Hostname.
Otherwise the Transported Files Status table on the Troubleshoot tab will incorrectly display 0 for
"Number of Transported Files".
• In the GUI you can receive an "Internal Server Error" due to a timeout if an action takes more than 3
to 5 minutes (ex. Trying to add a 3PAR array with an invalid IP address).
1.5 Recommended Hardware
The Utility Meter 9.3 software requires a ProLiant DL 320 server. 4GB of memory is required, a 160GB
SATA disk and a DVD-R drive.
CAUTION: The hardware used to run the Utility Meter 9.3 software must be used exclusively for the Utility
Meter software application. No other software applications or services are allowed on the Utility Meter
hardware.
1.5.1 Supported PPU Servers
The following servers are supported by PPU:
• HP Superdome 1
• HP Superdome 2 16s
• HP Integrity Servers
1.5.2 Supported URS Disk Arrays
The following disk arrays are supported by URS:
1.3 What Has Been Fixed in Version 9.3 11