9.2 HP Pay per use Utility Meter II Software Installation and Configuration Guide (December 2010)

the test report is generated and when it can be viewed on the UPS portal. For email data transport, the delay
can be longer due to the number of "hops" in the email routing before the data arrives at HP.
You can test the connection from a PPU partition to the Utility Pricing Solutions (UPS) Web portal by performing
the following procedure:
1. Sign-in to the UPS portal at: http://www.hp.com/go/payperuse.
2. In the UPS portal Welcome page, click the End-to-end connectivity verification link on
the left-hand side.
Figure 3-1 UPS Portal Welcome Page
3. On the End-to-end connectivity verification page, enter the System Serial Number
and the ID Number of the device you want, and then click Next.
3.3 Verifying Connectivity 25